Split-Design Solar Pendant Light | Up to 800 Lumens, 2700K–6000K Dimming, Separate Panel & 16.4 ft Cable | For Sheds & Garages

Lighting & Optics

• Up to 800 lumens at the highest setting for a defined task, entry or circulation zone
• Dimmable output with adjustable color temperature from 2700K warm white to 6000K cool white
• Wide downward lamp design; effective coverage varies with mounting height, brightness setting, room surfaces and obstructions

Solar Panel & Battery

• Separate 5V / 4.5W monocrystalline panel can be mounted outdoors while the lamp is installed indoors or under cover
• 4400mAh built-in rechargeable lithium battery
• Listed charging time: approximately 8–10 hours under suitable direct sunlight
• 16.4 ft (5 m) connecting cable for routing power from the outdoor panel to the lamp location

Performance & Runtime

• Listed runtime: approximately 10–14 hours after suitable charging
• Actual runtime varies with brightness, selected mode, motion frequency, season, weather, shade and battery condition
• Reduced charging during cloudy weather or winter can lower brightness or operating time

Controls & Sensors

• Both control types include remote dimming and 2700K–6000K color-temperature adjustment
• Motion Sensor (3 Modes): dim-plus-motion, motion-only and constant 50% nighttime output
• Timer Control: AUTO nighttime operation or preset 3H, 5H and 8H periods
• No verified motion-detection angle or distance is provided; test the sensor at the installed position

Durability & Installation

• Listed IP65 weather resistance; the system is not submersible and connectors should be kept away from pooled water
• No mains wiring is required for operation; wall or ceiling mounting still requires suitable fasteners and safe drilling
• Route the cable away from sharp bends, pinch points, moving doors and standing water
• Position the outdoor panel for direct sun while placing the lamp at the required indoor or covered lighting point

Dimensions & Package

• Solar panel: 7.17 × 5.0 in (18.2 × 12.7 cm)
• Listed materials: ABS housing with an acrylic crystal-texture shade
• Product media shows the lamp, solar panel, connecting cable, remote control and mounting accessories

Key Features & Benefits

This split-design solar pendant light lets the solar panel charge outdoors while the lamp provides adjustable overhead lighting inside a shed, garage, barn, gazebo or covered work area. The separate panel and 16.4 ft cable help reach locations where mains wiring is inconvenient.

• Match the control to the space: choose Motion Sensor for hands-free response in intermittently used areas or Timer Control for AUTO, 3H, 5H and 8H operation.
• Adjust the light: use remote dimming and 2700K–6000K color control for warmer ambient light or cooler task contrast.
• Plan one defined zone: up to 800 lumens can support a compact entry, workbench or circulation area, while large or divided buildings may need multiple fixtures.
• Use the split layout: keep the panel in direct sun outdoors and route the cable safely to a lamp installed indoors or under suitable cover.
• Set realistic runtime: the listed 10–14 hours depends on charging conditions, brightness and operating mode.

Before You Order

• Confirm the panel location receives enough direct sun for the listed 8–10-hour charging period.
• Measure the complete cable route and verify that 16.4 ft (5 m) reaches without stretching or pinching.
• Choose Motion Sensor or Timer Control before purchase because the control logic is variant-specific.
• Plan additional fixtures for large garages, divided sheds or separate task and entry zones.
• Keep connectors away from standing water and do not submerge any component.

Choose the control type that matches your space, then use Add to Cart to bring adjustable solar-powered overhead lighting to your shed, garage or covered work area.