These 60-lumen solar fence lights add warm-white or RGB accent lighting to fences, deck edges, steps and patio walls without mains wiring.
Choose a steady everyday glow, an individual RGB color, or Flash/Fade effects. The 60-lumen output helps mark boundaries and add close-range ambience; it is not designed to replace a security floodlight.
Lighting Modes & Output
-
Warm White: A steady, comfortable light for everyday fence, deck and patio ambience.
-
RGB: Select an individual RGB color or use Flash/Fade color effects for parties, holidays and decorative displays.
-
60-lumen accent output: Best for local glow and edge guidance rather than high-output task or security lighting.
Solar Charging & Runtime
Each fixture has an integrated solar panel. The supplier-listed full-charge time is approximately 4–6 hours in direct sunlight, with a listed runtime of over 10 hours after a full charge. Actual runtime varies with sun exposure, season, temperature, panel cleanliness and the selected mode.
Controls & Automatic Operation
Use the button on the fixture to cycle through the available light settings. Once the light is enabled, the dusk-to-dawn sensor turns it on after dark and off in daylight for solar charging.
Installation & Weather Protection
Mount each light with screws on a stable vertical surface—no mains wiring is required. Keep the top solar panel clear of fence caps, deep eaves, foliage, dirt and snow. The IP65-rated ABS housing is intended to resist dust and rain during normal outdoor use, but it should not be submerged or cleaned with high-pressure water.
Solar Fence Light Specifications
| Specification |
Details |
| Light output |
60 lumens per fixture |
| Lighting settings |
Steady Warm White, individual RGB colors, Flash and Fade effects |
| Automatic operation |
Dusk-to-dawn sensor |
| Listed charging time |
Approximately 4–6 hours in direct sunlight |
| Listed runtime |
Over 10 hours after a full charge; actual runtime varies |
| Housing material |
ABS |
| Ingress rating |
IP65 for normal outdoor rain and dust exposure; not submersible |
| Installation |
Screw-mounted, no mains wiring |
| Pack sizes |
4, 6, 8 or 12 lights |
Landscape vs Portrait Variant Guide
| Variant |
Housing size |
Choose it when |
| Landscape (Style 1) |
12 cm wide × 7.5 cm high (4.7 × 3.0 in) |
A wider horizontal format fits the mounting surface |
| Portrait (Style 2) |
7.5 cm wide × 12 cm high (3.0 × 4.7 in) |
A narrower, taller format fits the mounting surface |
Key Features & Benefits
-
Two everyday-and-event lighting styles: Use Warm White for routine ambience and RGB settings for decorative color.
-
No-wiring solar installation: Place lights where their integrated panels can receive direct sun.
-
Flexible layout planning: Choose Landscape or Portrait housings and 4-, 6-, 8- or 12-light packs.
-
Automatic nightly operation: Dusk-to-dawn control reduces daily switching once the fixture is set up.
Before You Order
- Confirm that every mounting point receives about 4–6 hours of direct sunlight.
- Use these 60-lumen fixtures for accent light and edge guidance, not security floodlighting.
- Expect shorter runtime during cloudy weather, winter or partial shade.
- Choose a stable screw-mounting surface and verify the Landscape or Portrait dimensions.
- IP65 does not mean submersible or suitable for high-pressure washing.
Choose the orientation and pack size that match your measured layout, then add coordinated warm-white or RGB accent light to your fence, deck or patio.