# 112-LED Solar Motion Sensor Wall Light | 120° PIR, 4 Modes, IP65 & 2200mAh | For Garages, Driveways & Entrances ##### Lighting & Optics - **112 LEDs** in a compact wall-mounted fixture for motion-responsive nighttime visibility - Light-color options: Warm White (3000K) or Cool White (6500K) - Listed coverage: approximately 15–19 m²; actual visibility depends on mounting height, surroundings and ambient light - No verified lumen or photometric data is provided; LED count is not a direct measure of brightness ##### Solar Panel & Battery - Integrated 1.5W / 5V monocrystalline solar panel - **2200mAh** built-in rechargeable battery - Listed charging time: approximately 4–6 hours in direct sunlight - The panel is fixed to the fixture, so deep eaves, roof shadows and trees can reduce charging ##### Performance & Runtime - Constant strong mode: listed for approximately 4 hours - Constant weak mode: listed for approximately 8 hours - Runtime in motion-responsive modes varies with motion frequency, selected setting, season, weather, shade and battery condition - Test the selected mode after a full day of charging; all-night operation is not guaranteed ##### Controls & Sensors - **Four operating modes** for motion-responsive or constant lighting - Listed PIR detection angle: 120° - Listed PIR range: 16–26 ft (5–8 m) - Listed bright period: approximately 13–15 seconds per trigger, extending while motion continues - A photocell supports automatic nighttime operation after the fixture is switched on and a mode is selected ##### Durability & Installation - **IP65 weather resistance** against dust ingress and water jets; not for immersion or standing water - No landscape wiring required; wall-mount installation uses the included screws and expansion anchors - Install where the integrated panel receives direct sun and the PIR sensor has a clear view across the expected direction of travel - Use fixings suitable for the mounting surface and allow water to drain away from the fixture ##### Dimensions & Package - Fixture size: 7.5 × 6.0 × 1.8 in (190 × 153 × 45 mm) - Listed materials: stainless steel and PC housing with a monocrystalline solar panel - Package: solar light, mounting screw set, positioning template and user manual ### **Key Features & Benefits** This 112-LED solar motion sensor wall light provides wire-free nighttime visibility around garage entrances, doors, patios, driveway sections, fences and paths. Select a motion-responsive mode to conserve battery or a constant mode for a defined period while the integrated panel recharges in direct sunlight. - **Match the mode to the location:** use motion-only bright for an entrance, dim-plus-motion for continuous guidance, or a constant mode when steady light is preferred for a limited period. - **Plan around direct sun:** because the panel is built into the fixture, shade from eaves, roofs or trees can reduce charging and runtime. - **Set realistic coverage:** the listed 15–19 m² is a planning estimate, not a guaranteed illuminated area; test one fixture after dark before planning a larger layout. - **Support critical areas:** no verified lumen or photometric data is available, so use additional hardwired lighting where continuous, code-required or critical security illumination is needed. Four Lighting Modes Mode Operation Best fit Dim + motion bright Maintains a low guidance light and increases output after motion Entrances or paths where a background glow is useful Motion-only bright Stays off without motion and switches to bright output after a trigger Garages or driveway sections where battery conservation matters Constant strong Steady stronger output, listed for approximately 4 hours Shorter periods requiring continuous light Constant weak Steady lower output, listed for approximately 8 hours Longer low-output guidance periods 112-LED Solar Motion Sensor Wall Light Specifications LED count 112 Light colors Warm White (3000K) or Cool White (6500K) Solar panel 1.5W / 5V monocrystalline, integrated Battery 2200mAh built-in rechargeable battery Charging Listed at approximately 4–6 hours in direct sunlight PIR sensor 120° angle; listed range 16–26 ft (5–8 m) Trigger period Listed at approximately 13–15 seconds, extending with continued motion Weather rating IP65; not submersible Dimensions 7.5 × 6.0 × 1.8 in (190 × 153 × 45 mm) Installation Wall mount; no landscape wiring required ### **Before You Order** - Confirm approximately 4–6 hours of direct sun at the exact mounting position. - Use the listed 6.5–13 ft (2–4 m) mounting-height range only as an initial reference, then test PIR response at the site. - Avoid immersion, standing water and locations with poor drainage. - Choose Warm White (3000K) for a softer appearance or Cool White (6500K) for crisper contrast. Choose the light color and operating mode that match your entrance, driveway or patio, then test the placement after dark before adding more fixtures. ## Details - **Price:** 109.99 USD - **Vendor:** NoxLumin - **Type:** outdoor lights - **Tags:** battery, battery 2000-3999mah, detector, flood security, integrated panel, led, no wiring, outdoor, outdoor lights, residential, solar energy, timer control, wall mount ## Variants | Variant | Price | Available | |---------|-------|-----------| | Cool White (6500K) | 109.99 USD | In stock | | Warm White (3000K) | 109.99 USD | In stock | ## Images - 112-LED solar motion sensor wall light with a wide lighting panel and integrated solar charging surface for outdoor security use - Outdoor solar wall light product view showing the 112-LED lighting array, motion sensor and compact weather-resistant housing - Solar motion sensor wall light illuminating an exterior area at night for entrances, garages, patios and backyard security - 112-LED solar motion sensor wall light illuminating a residential back door at night - Solar wall light with motion sensor feature graphic highlighting automatic security lighting for outdoor residential areas - 112-LED solar wall light feature view showing four selectable operating modes for motion sensing and nighttime illumination - Solar security wall light diagram showing PIR motion detection coverage for automatically lighting nearby outdoor areas - IP65 weather-resistant solar motion sensor wall light for exterior mounting on garages, entrances and patios - 112-LED solar motion sensor wall light illuminating hillside stairs for nighttime step and path visibility - Solar motion sensor wall light illuminating the exterior of an urban restaurant at night ## Additional Information - **Product rating:** 1.0/5.0 - **Best for:** Garage entrances, doors, patios, driveway sections, fences and paths needing motion-responsive nighttime visibility, No-wiring locations where the integrated panel can receive direct sun, Buyers choosing between Warm White (3000K) and Cool White (6500K) with four operating modes - **Placement guidance:** Mount on a sun-exposed wall with the PIR sensor aimed across the normal direction of travel. Keep branches and heat sources out of the 120° field, use the listed 2–4 m mounting range only as an initial reference, and test the 5–8 m response after dark. - **Quantity guidance:** Start with one fixture for one defined zone and test after dark. The listed 15–19 m² coverage is an estimate; use additional lights for large driveways, separate entrances or areas blocked by walls and landscaping. - **Variant selection guide:** Cool White (6500K) gives crisper contrast for garages and security-oriented entrances; Warm White (3000K) is softer for patios and doorways. Both variants use the same 112-LED body, 2200mAh battery, PIR sensor and four modes. - **Check before buying:** No verified lumen or photometric data is provided; the listed 15–19 m² coverage is a planning estimate, not a guarantee, Confirm about 4–6 hours of direct sun at the exact mounting point; runtime varies by mode, motion frequency, season and weather, IP65 resists dust and water jets, but the fixture is not submersible and should not be installed where water pools --- > Source: [NoxLumin](https://noxlumin.com/products/112-led-solar-motion-sensor-wall-light) > Updated: 2026-08-15